>> current page£º    product  ¡· HM1798 roller-bed steamer
       
             
 
     
   
     
       
             
   
       
  >> product use:
   
 

this unit is used for oxygenated-bleaching of the fabrics of all cotton, terylene/cotton.

   
  >> main features:
   
  • type: roller-type with double layers
  • unit hand: L.H or R.H
  • nominal width(mm)£º1600¡¢1800¡¢2000
  • nominal speed(m/min)£º 70
  • content(m) £º4500 (£¼200g/m2
  • dwelling time(min) £º40¡«60
  • steam pressure(Mpa)£º 0.2
  • max.steam temperature(¡æ)£º98
  • driving system: A.C. frequency conversion
  • installed power(kw): 16.3
  • overall dimension£¨L¡ÁW¡ÁH£©mm£º14465¡Á£¨W+2110£©¡Á4710
   
  >> unit structures:
 
  • unit body: the body is welded by S.S, 5 sections, the heat preservation plate is installed on the surface. The appropriate liquid in the bottom of the body
  • heating mode: the liquid is mainly heated by the steam-gas indirectly and saturated steam accessorially .
  • pre-heating section: the two rows of big rollers in the upper and lower are driven in group, also the tension is adjusted by compensator.
  • dwelling plaiting section: it¡¯s the roller been squeezed b the cylinder , the plaiting cloth is folded through the pendulous roller, the range also can be adjusted.
  • double layers guide rollers: the rollers are driven concentratively, the gap of the cloth can be adjusted at the position of the turn of the cloth.
  • the controlled section of the plaiting cloth: there are alert and stop instruments when the cloth is over infeeding .