this unit is used for mercerizing and stentering the fabrics of all cotton ,terylene/cotton after impregnated with strong alkali.

• type: single layer of 4″clip chain
• unit hand: L.H or R.H
• nominal width(mm)：1600/1800
• nominal speed(m/min)：by the range
• the distance between the front and back clip-chain plates(m)：17.17
• time of rinse and suck alkali：5 rinsing and 5sucking
• the adjusted range of the width(mm)：850～1600mm or 1200～1800mm
• installled power(kw)：37
• driving mode: the clip-chain plates are driven by worm wheel and worm pole.
• overall dimension（L×W×H）mm：18850×4530/4730×2458

• this unit mainly consist of frame, clip-chain, tramroad, adjustment, direction-guiding device, driving device, supporting device, rinsing and sucking section, alkali trough, etc.
• frame: the material of the left and right frames, support crossbeam are all cast
• clip-chain:4″
• tramroad:cast,threre are 2mm thickness of support plates at the position of infeeding and plaiting .
• width adjustment: there are two kinds of adjustment of the width: by hand and by motor. The first and second tramroad are adjusted separately by hand, there are also cloth width indicator and position-limited device
• direction-guiding device: automatic selvedge-explorer
• supporting devices: the supporting devices are piled equably, the material of them is PVC tubeφ50×6
• driving system: the clip-chains are driven by worm wheel and worm pole, the width is adjusted by the main axis driven by the A.C motor. The selvedge –exploration is driven by A.C motor
• rinsing and sucking: the rinsing tundish is made in S.S, the alkali liquid is overflowed from it, the sucking box is of many long holes，the alkali is sprayed from bottom to top, the width can be adjusted automatically with the tramroad.
• alkali trough: the material of the body is folded by Q235A steel.